Showing posts with label laptop. Show all posts
Showing posts with label laptop. Show all posts

Sunday, June 12, 2011

Check Out This Picture Of The First Laptop


Via Old Picture Of The Day, here's the Osborne 1, which was released in 1981.

It weighed ~25 pounds, had a 5-inch screen, and cost $1,800.

Osborne 1

Technically, this was the first "portable" computer. It wasn't until a couple of years later that the term "laptop" was actually used.

Here's some history from Wikipedia:

As the personal computer became feasible in the early 1970s, the idea of a portable personal computer followed. A "personal, portable information manipulator" was imagined by Alan Kay at Xerox PARC in 1968,[6] and described in his 1972 paper as the "Dynabook".[7]

The IBM SCAMP project (Special Computer APL Machine Portable), was demonstrated in 1973. This prototype was based on the PALM processor (Put All Logic In Microcode).

The IBM 5100, the first commercially available portable computer, appeared in September 1975, and was based on the SCAMP prototype.[8]

As 8-bit CPU machines became widely accepted, the number of portables increased rapidly. The Osborne 1, released in 1981, used the Zilog Z80 and weighed 23.6 pounds (10.7 kg). It had no battery, a 5 in (13 cm) CRT screen, and dual 5.25 in (13.3 cm) single-density floppy drives. In the same year the first laptop-sized portable computer, the Epson HX-20, was announced.[9] The Epson had a LCD screen, a rechargeable battery, and a calculator-size printer in a 1.6 kg (3.5 lb) chassis. Both Tandy/RadioShack and HP also produced portable computers of varying designs during this period.[10][11]

The first laptops using the flip form factor appeared in the early 1980s. The Dulmont Magnum was released in Australia in 1981–82, but was not marketed internationally until 1984–85. The $8,150 ($18,540 in current dollar terms) GRiD Compass 1100, released in 1982, was used at NASA and by the military among others. The Gavilan SC, released in 1983, was the first computer described as a "laptop" by its manufacturer[12] From 1983 onward, several new input techniques were developed and included in laptops, including the touchpad (Gavilan SC, 1983), the pointing stick (IBM ThinkPad 700, 1992) and handwriting recognition (Linus Write-Top,[13] 1987). Some CPUs, such as the 1990 Intel i386SL, were designed to use minimum power to increase battery life of portable computers, and were supported by dynamic power management features such as Intel SpeedStep and AMD PowerNow! in some designs.

Displays reached VGA resolution by 1988 (Compaq SLT/286), and colour screens started becoming a common upgrade in 1991 with increases in resolution and screen size occurring frequently until the introduction of 17"-screen laptops in 2003. Hard drives started to be used in portables, encouraged by the introduction of 3.5" drives in the late 1980s, and became common in laptops starting with the introduction of 2.5" and smaller drives around 1990; capacities have typically lagged behind physically larger desktop drives. Optical storage, read-only CD-ROM followed by writeable CD and later read-only or writeable DVD and Blu-Ray, became common in laptops soon in the 2000s.

On March 2011, Lenovo has built the world's first eye-controlled laptop with using eye tracking technology from Tobii. A built-in small infrared camera will track eye's positioning which make as mouse do as select, point, scroll, etc. There are also games with eye fully functioning.[14]

Please follow SAI: Silicon Alley Insider on Twitter and Facebook.

Join the conversation about this story »







Check Out This Picture Of The First Laptop


Backlink: http://feedproxy.google.com/~r/typepad/alleyinsider/silicon_alley_insider/~3/kQItDcUOrbU/the-first-laptop-2011-6

Monday, November 29, 2010

Have It Your Way: Sparkbuy Helps You Hone In On Your Ideal Laptop

Head over to Amazon's computer section right now and you'll notice that you have quite a few choices. Thousands of them, in fact. And honing in on the one that best suits your needs can be quite a chore — especially when the data you need to make a good comparison is scattered across blogs, review sites, and electronics databases. Sparkbuy thinks there's a better way. The site, which recently closed a $1 million funding round, has set out to build a 'Kayak for consumer electronics', and it's starting with laptop computers. The gist of it: enter which criteria are important to you, and the site will give a listing of laptops that it thinks you'll like best. Sparkbuy is entering private beta tonight, and the first 500 TechCrunch readers to enter the invite code 'TCRUNCH-VIP' will gain access (make sure to click the 'Sign Up' link on the site).

Have It Your Way: Sparkbuy Helps You Hone In On Your Ideal Laptop


Backlink: http://feedproxy.google.com/~r/Techcrunch/~3/vrNLhLuj5eE/

Thursday, November 11, 2010

Recycling by Design: Students Create a Recyclable Laptop [VIDEO]

by Nino Marchetti

A class of Stanford University graduate students recently created a prototype of a computer laptop which can much more easily be broken down for recycling than notebook computers on the market today. The Bloom laptop, as it is called, earned the students an Autodesk Inventor of the Month award for October, as the students designed the laptop concept using Autodesk software. The students, as part of Stanford's ME310 course, wanted to tackle a problem around e-waste that, for example, saw 1.9 to 2.2 million tons of electronics becoming obsolete in 2005, with only 345,000 to 379,000 tons of it being recycled. The task assigned to these students by their professor was to "create a recyclable consumer electronics product that makes electronics recycling a simpler, more effective and engaging process." This laptop concept effectively does this, sporting a modular design that can easily be separated into different material types - such as plastics, metals and circuitry - for easier recycling. It is said the Bloom laptop idea "can be disassembled in just two minutes, without tools and in just 10 steps. By comparison, a commercially available laptop takes about 45 minutes to disassemble, requires three separate tools and involves as many as 120 steps." Also of note with this easy-to-dissemble design is a keyboard and track pad that can be detached to allow for improved ergonomics; and also an easier process "to repair and upgrade components over the lifetime of the product, so that buying a computer is no longer a singular investment, but a longer-term relationship between the consumer and the service provider." "Consumer electronics waste is a significant and growing problem," said Robert Kross, senior vice president, Manufacturing Industry Group at Autodesk, in a statement. "These students are facing that issue head-on with their innovative Bloom laptop prototype. It's encouraging and exciting to see college students embrace Digital Prototyping to tackle the sustainability challenges of our times." Reprinted with permission from EarthTechling

Post originale: http://featured.matternetwork.com/2010/11/recycling-by-design-students-create.cfm